
Dry cleaning is a challenging business. Problems with worker exposure, waste disposal, environmental issues, regulations, restrictions – the list goes on and on. And that’s before you even clean a garment! All of this continues to make it difficult to provide a low-cost service to the dry cleaning customer. The available replacement choices are few, and unlike other alternatives, DrySolv™ is one that actually works! In numerous laboratory and independent cleaning performance tests, pilot studies, and over 3 years of continual customer usage, DrySolv™ has proven that it cleans equal to, if not better than, PERC in all dry cleaning applications; all while doing it with less energy, less time, less environmental impact, less waste, less solvent usage, less….well, less everything. And you know what they say, “sometimes less is more.” So take a minute out of your busy day and use this website to educate yourself on DrySolv™. It may be the “solution” you’ve been looking for.
- Message from Ray Roccon , Dry Cleaning Division Manager – Enviro Tech International, Inc.
Replacing Perc without compromising cleaning performance has been a long-standing problem among the professional cleaning world. Problem solved.....with DrySolv.
DrySolv™ is a patented dry cleaning solvent that is non-chlorinated, non-flammable, non-hazardous, and is vastly more environmentally responsible than PERC. It is a direct replacement for PERC and other cleaning chemicals in the dry cleaning industry that works in your existing PERC dry cleaning machine. Research has shown DrySolv™ to be superior to PERC in that it cleans better, and cleans faster. Because DrySolv™ is non-hazardous, costly issues such as environmental compliance and waste disposal of PERC are eliminated or significantly reduced.
Being “Green” has never been easier with DrySolv. The first environmentally responsible replacement solvent for your dry cleaning machine!
- DrySolvä is non-flammable, showing no flashpoint in multiple tests and test methods.(ASTM D-56 TCC, ASTM D-92 COC, ASTM D-93 TCC).
- DrySolvä is also non-chlorinated.
- DrySolväis non-hazardous.(DOT, OSHA, NESHAP, RCRA, Clean Water Act)
- DrySolvä is not a hazardous air pollutant, is SNAP approved, and does not contribute to global warming.(NESHAP, Significant New Alternative Program-SNAP approved (Federal EPA), Not Title V)
- The USEPA states that DrySolv’sä main ingredient is less persistent in the environment than many other solvents, is of low to moderate concern for movement in soil, does not warrant listing under the Toxics Release Inventory and is not prone to bioaccumulation. (USEPA - Federal Register May 30, 2007).
- DrySolvä does not have a hazardous decomposition or hazardous polymerization.
Get a “green” advantage over your competitors with DrySolv™, the simple replacement for PERC. The dry cleaning industry demands perfection in the service it provides. Enviro Tech understands this requirement and has the ultimate answer for effective, environmentally safe cleaning in your facility, and DrySolv™ is that answer.
In a world without Perc, what alternative will you chose?
EnSolv EX
For Greener and Safer Granular Extractions, All Roads Lead to EnSolv EX
Replacing TCE has Never Been Easier or Safer
EnSolv EX was formulated in response to a need for a safer granular and bituminous asphalt extraction solvent to trichloroethylene (TCE). In July of 2005, AASHTO approved nPB solvents, such as EnSolv EX, for the extraction of bitumen from asphalt. EnSolv EX also conforms to several ASTM standards, a few of which are listed below.
- ASTM D-2172
- ASTM D-6368
- ASTM D-5404
Join the Movement to Eliminate TCE from the Workplace
Today, many state Departments of Transportation (DOTs), shingle manufacturers, oil refineries and others who have used TCE in the past for extractions have easily and successfully switched to EnSolv EX.
The patented stabilizer package blended into the azeotropic EnSolv EX formula ensures that the solvent can be recovered and redistilled over and over again through numerous cycles beyond competing brands. All this means EnSolv EX will last longer and provide for more efficient and more AQCCURATE extractions.
Technical Details
- EnSolv EX is available in 1, 5, 30 and 55 Gallon containers
- Approximate weight is 11 lbs per gallon
- Non Flammable, Non Hazardous
- Direct Replacement for TCE